const int buttonPin = 2;     // the number of the pushbutton pin 
int Buzzer1 = 9;

// variables will change:
int buttonState = 0;

// variable for reading the pushbutton status
void setup() {
// initialize the piezo as output: 
pinMode(Buzzer1, OUTPUT);
// initialize the pushbutton pin as an input: 
pinMode(buttonPin, INPUT);
}
void loop(){
// read the state of the pushbutton value: 
buttonState = digitalRead(buttonPin);

if (buttonState == HIGH) {
 // play th Music
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,450,225); 
delay(300); 
tone(Buzzer1,450,225); 
delay(500); 
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,450,200); 
delay(300); 
tone(Buzzer1,600,300); 
delay(300); 
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,700,300); 
delay(300); 
tone(Buzzer1,700,300); 
delay(500); 
tone(Buzzer1,600,300); 
delay(300); 
tone(Buzzer1,400,200); 
delay(1000); 
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,650,200); 
delay(500);
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,650,200); 
delay(300); 
tone(Buzzer1,650,200); 
delay(500); 
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,400,200); 
delay(1000); 
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,600,300); 
delay(500); 
tone(Buzzer1,600,300); 
delay(500); 
tone(Buzzer1,800,300); 
delay(500); 
tone(Buzzer1,800,300); 
delay(500); 
tone(Buzzer1,400,200); 
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,400,200); 
delay(500); 
tone(Buzzer1,300,150); 
delay(500); 
tone(Buzzer1,300,150); 
delay(500); 
tone(Buzzer1,300,150); 
delay(500); 
tone(Buzzer1,300,150); 
delay(500); 
tone(Buzzer1,300,150); 
tone(Buzzer1,300,150); 
tone(Buzzer1,300,150); 
tone(Buzzer1,300,150);

} 
}